This cooling and warming massaging cushion is ideal for use in your home, office or car. It provides complete back coverage with a cooling option with 5 fan speeds, vibrating massage setting and heated lower back option. Easy to use and remote control operated.
Disclaimer: The device is intended to be used for massaging and for warming the lower back. The device also has a cooling function. It is used for relaxation and is not a replacement for medically required treatment. Do not use the device in rooms containing easily ignitable or explosive substances. Never operate the device in the vicinity of a gas source. Keep the device and accessories away from fire and other heat sources. Only use the device if you have no physical illnesses or ailments! Danger of suffocation! Keep children and animals away from the packaging material. Danger of strangulation! Make sure that the connecting cable is always kept out of the reach of small children and animals. Danger of tripping! Make sure that the connecting cable does not present a trip hazard. Never stand on the device. Do not use the device before going to bed. The massage has a stimulating effect, which may lead to problems getting to sleep.
Please see the Usage tab for how to use information.
Vendor Warranty Terms: Your Medic Therapeutics Product is backed by a limited lifetime manufacturer's warranty. Medic Therapeutics will repair or replace your device at any time should it fail due to a defect in material or workmanship, subject to the certain limitations. Address: Medic Therapeutics Service Center3069 Taft Street Hollywood, FL 33021. Contact: warranty@medictherapeutics.com
PLEASE NOTE: Do not use the device while driving a motor vehicle. Unwind the connecting cable fully before use. The massage mat must not be folded up or covered when it is switched on. Do not place the controller and the connecting cable on or under the massage mat during operation.
1. Join together the seat surface (8) and back surface (1) using the hook and loop fastener.
2. Plug together the connecting cables (9) of the two surfaces.
3. Place the massage mat on the seat and fix it in place there with its fastening straps. To secure it to a car seat, the seat surface also has two rubber loops which can be placed around the adjusting wheels for the backrest of the car seat.
4. Connect the coaxial connector of the main adapter or car adapter to the socket of the device.
5. Plug the main adapter into an easily accessible plug socket or plug the car adapter into the cigarette lighter of the vehicle.
6. Sit down on the massage mat and lean back.
7. Start the ignition if using the device in a vehicle.
8. Press the I/O button (12) to activate the massage mat. The vibration and also the heating or cooling function can then be switched on: - Start and stop the vibration by pressing the button (13). Various types of vibrations are sequenced through after the start.- To activate the two level heating function press the button (15). Press once for high heat. Press twice for low heat. Press a third time to turn heating function off.- If the button (14) is pressed once, the cooling switches on at the highest level. There are five cooling levels. Each further press of the button switches the cooling to a lower level until it is switched off entirely.- NOTE: The heating and cooling functions cannot be switched on at the same time. The vibration and heating function are automatically switched off after 30 minutes of constant operation.
9. After use, press the I/O button to switch the device off completely.
10. Pull the main adapter out of the plug socket or pull the car adapter out of the cigarette lighter.
11. Allow the device to cool down if the heating function was activated before it is stored away (see the "Cleaning and Storage" chapter).
Care Instructions: When storing it away, do not press the massage mat together too strongly and do not use any force. It could be damaged. Do not use any sharp or abrasive cleaning agents or cleaning pads for cleaning. These may damage the surfaces. Make sure that the massage mat is not connected to the main power. Wipe down the massage mat and the controller (5) with a damp cloth. Then dry it with a soft cloth or allow it to dry in the air. Loosely fold up the massage mat and place it together with the controller in the associated packaging. Store the device in a cool, dry place which is protected from direct sunlight and is out of the reach of children and animals. Do not place any objects on the folded massage mat, so that it is not compressed.