Stefano Oro "The Phoenix Ricami" 14K Gold Bar 16"+2" Necklace

In order to determine the karat weight of a specific item, simply look for the quality mark. Jewelry items will bear the stamp of their karatage based upon the United States or European system of marking. The United States system designates pieces by their karats—24K, 18K, 14K, 10K, etc. The European system designates pieces by their percentage of gold content. For instance, 10K gold is marked “417,” denoting 41.7% gold; 14K is marked “585,” denoting 58.5% gold; and 18K is marked “750,” denoting 75% gold; etc.

Barrel Clasp: Used on most rope chains to make the chain more secure. The barrel clasp looks like part of the chain and twists to get a pendant on and off.

Lobster Claw Clasp: As a traditional clasp style found in bracelets and necklaces, the lobster claw is generally reserved for heavier styles that may need added strength. The closure's shape is more oblong, similar to a teardrop shape, and is controlled by a tip that opens and closes the spring in the clasp.

Magnetic Clasp: A magnetic clasp relies on a strong internal magnet that works to pull both ends of the clasp together. In most cases, a magnetic clasp is used for light to medium weight jewelry pieces that do not put excessive stress on the magnet.

S-Clasp: An S-shaped piece of metal that connects a chain by hooking metal rings on each end of the S-shape.

Slide Insert Clasp: This type of clasp is exactly as it sounds. With a box-like shape that is hollow on the inside, the wearer will slide the nearly-flat tab into the box until it clicks, indicating a secure closure. On some jewelry, a slide insert clasp will be accompanied by a side safety catch, which adds strength and security to the clasp.

Spring Ring Clasp: One of the most common closure types, the spring ring clasp is typically used for light to medium weight bracelets or necklaces. It is round in its design and features a small tip which controls the opening and closing of the spring. The circle then closes around another smaller loop or link at the other end of the strand.

Toggle Clasp: A toggle clasp is a narrow piece of metal, usually designed in the shape of a bar, which is then pushed through a circular ring to act as a fastener. Unlike the lobster claw or spring ring clasps, a toggle clasp is not controlled by a spring. The pretty design is less secure than other closure types, but is usually meant to be a big part of the design and is meant to "show". The clasp is an attractive way to secure a chunkier link bracelet or necklace.

Necklace Sizing
The length of a necklace or chain you buy depends upon a number of factors, including what you will be wearing with it and your neck size.

To measure your neck, wrap a soft, flexible tape measure around the base of your neck. This is the same measurement used for collar sizes in men's shirts. A good rule of thumb is to buy a necklace or chain a minimum of two sizes up from your neck measurement.

Barrel Clasp: Used on most rope chains to make the chain more secure. The barrel clasp looks like part of the chain and twists to get a pendant on and off.

Lobster Claw Clasp: As a traditional clasp style found in bracelets and necklaces, the lobster claw is generally reserved for heavier styles that may need added strength. The closure's shape is more oblong, similar to a teardrop shape, and is controlled by a tip that opens and closes the spring in the clasp.

Magnetic Clasp: A magnetic clasp relies on a strong internal magnet that works to pull both ends of the clasp together. In most cases, a magnetic clasp is used for light to medium weight jewelry pieces that do not put excessive stress on the magnet.

S-Clasp: An S-shaped piece of metal that connects a chain by hooking metal rings on each end of the S-shape.

Slide Insert Clasp: This type of clasp is exactly as it sounds. With a box-like shape that is hollow on the inside, the wearer will slide the nearly-flat tab into the box until it clicks, indicating a secure closure. On some jewelry, a slide insert clasp will be accompanied by a side safety catch, which adds strength and security to the clasp.

Spring Ring Clasp: One of the most common closure types, the spring ring clasp is typically used for light to medium weight bracelets or necklaces. It is round in its design and features a small tip which controls the opening and closing of the spring. The circle then closes around another smaller loop or link at the other end of the strand.

Toggle Clasp: A toggle clasp is a narrow piece of metal, usually designed in the shape of a bar, which is then pushed through a circular ring to act as a fastener. Unlike the lobster claw or spring ring clasps, a toggle clasp is not controlled by a spring. The pretty design is less secure than other closure types, but is usually meant to be a big part of the design and is meant to "show". The clasp is an attractive way to secure a chunkier link bracelet or necklace.

Necklace Sizing
The length of a necklace or chain you buy depends upon a number of factors, including what you will be wearing with it and your neck size.

To measure your neck, wrap a soft, flexible tape measure around the base of your neck. This is the same measurement used for collar sizes in men's shirts. A good rule of thumb is to buy a necklace or chain a minimum of two sizes up from your neck measurement.